# You should have entries above from sysinstall. # At least defaultrouter, hostname, and ifconfig_. # Be sure to clean up any duplicate definitions here. --cp #dumpdev="/dev/ad0s2b" # Set this to your swap slice and uncomment these two lines. --cp #dumpdir="/var/crash" # Directory where crash dumps are to be stored savecore_flags="-z" #rand_irqs="" # Set this to your Ethernet & IDE controllers from # "grep irq /var/run/dmesg.boot". --cp ipv6_enable="NO" # Set to YES to set up for IPv6. ipv6_network_interfaces="" firewall_enable="YES" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="open" # Firewall type (see /etc/rc.firewall) firewall_logging="YES" # Set to YES to enable events logging log_in_vain="0" # >=1 to log connects to ports w/o listeners. xntpd_enable="YES" # Run ntpd Network Time Protocol (or NO). xntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). nfs_server_enable="NO" nfs_server_flags="-t -u -n 4" # Flags to nfsd (if enabled). nfs_client_enable="YES" nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). # for BIND named_enable="YES" # Run named, the DNS server (or NO). # for postfix -- see also /etc/mail/mailer.conf sendmail_enable="YES" sendmail_flags="-bd" sendmail_pidfile="/var/spool/postfix/pid/master.pid" sendmail_outbound_enable="NO" sendmail_submit_enable="NO" sendmail_msp_queue_enable="NO" dracd_enable="YES" # Provide POP-before-SMTP functionality. --cp spamd_enable="YES" # SpamAssassin daemon netatalk_enable="YES" # Enable netatalk afpd_enable="YES" # Enable AFP (over TCP) cnid_metad_enable="NO" # Enable